Industrial large fan effective power saving method


  The industrial big fan solves the thorny problem […]


The industrial big fan solves the thorny problems of cooling, ventilating, eliminating the hot and humid, etc. for the workshop of the manufacturer, and is deeply loved and trusted by the customers. Some customers found that the fan consumes a large number of electrodes during the use of the fan in their own plant. I would like to ask us if there is a good way to make the industrial large fan better save electricity. Exactly, the editor is currently collating some information about the power saving scheme of industrial fans. I will give you a rough explanation for everyone to learn from.

The power consumption of a large industrial fan is related to its own power. The power of large industrial fans varies, so the power consumption is also different. It is not difficult to save power for industrial fans.

First, due to the rapid development of the fan industry, the technical barriers are not high, and the products on the market are uneven. Therefore, when you buy products, you must choose products of excellent quality.

Second, when large industrial fans are used, they are best placed next to doors and windows to facilitate air circulation, improve the cooling effect, and shorten the use time, which can better reduce power consumption.

Third, as far as the use of the fan itself is concerned, generally the fan with a large fan blade has higher electric power and consumes more power. The power consumption of the electric fan is proportional to the speed of the fan blade. For example, a 400 mm fan uses a fast gear When the power consumption is 60W, the slow gear is only 40W. The power consumption of the fastest gear and the slowest gear of the same electric fan differs by 40%. Therefore, usually open the fast gear first, and use the slow gear after cooling down. Reduce power consumption of electric fans. In the case that the air volume meets the requirements for use, try to use medium or slow gear.

Fourth, because industrial fans can directly convert electrical energy into kinetic energy, the power consumption is very low, the maximum power is only 60W, which is equivalent to the power consumed by ordinary lighting table lamps. Therefore, from the perspective of energy saving, midsummer Using fans during the season is undoubtedly the best choice. When industrial fans are used together with air conditioners, the air conditioner temperature is set at 26℃~28℃, which saves electricity and money.

Finally, pay attention to the maintenance of industrial large fans at ordinary times, maintain its good performance, and avoid the occurrence of fan blade deformation and vibration. In this way, it is also conducive to the saving of electrical energy to a certain extent.