Every home should have a good HVAC fan. Every time the […]
Every home should have a good HVAC fan. Every time the fan is turned on and running, it is cooling the air around the house. This helps to reduce the amount of heating and cooling that takes place inside the house and it can also save money on utility bills. Here are some benefits of having a good HVAC fan in your home.
Regular Use Consists of Two Things A good HVAC fan is needed to help with cooling down your house. In order for this to happen, you need to have a constant setting of airflow through the vents and into the rooms of the house. Running the fan continuously and filtering the air throughout your house has many benefits for your family's health. But fans do have some cons.
When they are running, they can cause some major problems for your HVAC system. The two main problems that can occur when the fan is running are: increased cooling, and increased heating. If the fan is constantly running and not changing the coolant levels, it can cause your system to overheat and work harder to cool down the room. The increase in heat is caused by the filter becoming clogged with the dirty air that is blown through the ducts. The dirty air has the potential to cause some serious damage to your HVAC system if left unfiltered.
A major problem that can happen when the fan is running too much is that it can damage your HVAC ducts. The ducts can become so clogged with dirt and debris that the fan motor can have difficulty pumping air through them. If you find that the ventilation in your rooms is becoming blocked or restricted by the accumulation of dirt and debris, then it is recommended that you limit the amount of time that the fan constantly runs in order to avoid the damage to your ducts.
Another issue that can occur if your heating and cooling system are working too hard while the HVAC fan is running too hard is that you can have both issues at once. When you put too much energy into the system, your system can go out of whack and not return to normal operating settings. In this scenario, you will have both increased heating and cooling, as well as a dysfunctional fan motor. It is often best to try to reset your heating and cooling settings back to normal before you attempt to reset the fan. It may be a good idea to take your system for a tune up as well, so that any possible airflow issues can be diagnosed and resolved.
One of the biggest ways to tell if you have a problem with your system is if you experience a reduction in air quality, known as a "honeycomb" effect. This can occur for several reasons, including a filter that is not cleaned properly, debris in the air ducts, or clogged air filters. Honeycomb effect is not always visible, but it can happen. If you have determined that your fan motor is not causing the problem in one of these scenarios, you will know that it is necessary to contact an air conditioning professional.